| Transit
Frame |
The
transit frame is the housing into which the other components
are fitted. |
|
| MCT
Lubricant (Tallow) |
Used
when packing. Allows the insert modules to slide easily
over each other. |
|
| RTV-106
Sealer |
For
armored cable. Sealer should be applied in the grooves
to seal the space between the armor and the cable sheath
in navy cables, and the groove in the interlock of industrial
cables. |
|
| Compression
Bolt |
When
tightened, the bolt applies pressure to the compression
plate sealing the grooved insert modules around the
cables. |
|
| End
Packing Standard |
End
packing assembly is bolted into place to provide a fire
and watertight seal above the compression plate. The
standard end packing assembly is used when both sides
of the transit frame are accessible. |
|
| End
Packing Special |
The
special end packing assembly serves the same purpose
as the standard and is used when the transit frame is
accessible from only one side. |
|
| Compression
Plate |
The
compression plate acts as a pressure plate above the
internal assembly. |
|
| Stay
Plates |
Stay
plates are inserted between every completed row to help
distribute compression forces within the frame and to
keep modules from dislodging under high pressure conditions. |
|
| Grooved
Insert Modules |
Grooved
insert modules are available in seven module sizes to
accommodate a range of cable/pipe from 5/32" to 3-3/4"
O.D. They fit snugly around the cable or pipe to form
an airtight, watertight seal when compression applied
in final assembly step. |
|
| Spare
Insert Modules |
Solid
modules are used to fill voids or allow for future addition
of cables. They are available in 3 module sizes. |
|
Fill-in
Insert Strips
|
Used
to fill space gaps. Available in 5 and 10mm thickness.
Strips are 120 mm long and are split to allow cutting
at any desired length. |
|
