| |
|
| |
 |
|
|
| |
 |
Nelson
MCT(TM), MPS(TM),
and EMCT(TM) Features
Ideal
cable management system.
Airtight and watertight, even under shock or high vibration
conditions.
Compact, yet accommodates a large number and variety
of cables, conduits, pipes and tubing.
Easy to install.
Provides cable support, eliminating the need for holding
grips in many cases.
Does not require cable derating.
2 x 10 rads gamma radiation test.
Suitable for hazardous location.
Meets requirements of N.E.C. Article 300-19 for cable
support.
|
|
|
|
|
|
| |
|
| |
 |
Nelson
CLK(TM) Firestop Sealant Features
Waterproof.
Pressure tight.
Flexible. Allows for movement or vibration.
Does not require cable derating.
Smoke, gas and water tight.
Suitable for overhead applications (non-sag).
No damming required (non-sag).
Excellent flowability (self-leveling).
Quick, easy installation.
Smooth surface.
Non-shrinking. Non-toxic.
Easily repenetrated.
Tested to UL-1479, ASTM E 84 and E-814.
|
| |
Click for MSDS Click for Technical Data |
|
|
| |
|
| |
 |
Nelson
CMP(TM) Firestop Compound Features
Non-toxic.
Non-shrinking.
Highly cohesive and adhesive.
Does not require cable derating.
Suitable for overhead applications.
Ideal for large openings.
Water resistant.
Easily repenetrated.
Excellent shelf life.
Finishes to a uniform surface.
Tested to UL-1479, ASTM E-136 and E-814.
|
| |
Click for MSDSClick for Technical Data |
|
|
| |
|
| |
 |
Nelson
FSC(TM) FSC+(TM)
Firestop Coating Features
Excellent
adhesion.
Simple application using brush or spray.
Does not require cable derating.
Tested to IEEE-383 vertical cable tray.
Flexible.
Easy clean-up.
Intumescent.
Non-toxic.
|
| |
Click for MSDSClick for Technical Data |
|
|
| |
|
| |
 |
Nelson
PLW(TM) Firestop Pillow Features
Reusable.
Non-toxic.
Intumescent.
Easily repenetrated.
Excellent shelf life.
Does not require cable derating.
Quick, easy installation.
Tested to ASTM E-814 and -1479.
|
| |
Click for MSDSClick for Technical Data |
|
|
| |
|
| |
|
| |
|
| |
 |
Nelson
WRS(TM) Firestop Wrap Strip:
Nelson
WRS(TM) is an intumescent firestop wrap strip.
When exposed to fire, the wrap strip expands to lock
the seal in place.
|
| |
Click for MSDSClick for Technical Data |
|
|
| |
|
| |
 |
Nelson
FSP(TM) Firestop Putty and Pads
Features
Quick
and Easy Installation -- no special tools required.
Does not require cable derating.
No mix, no wasted, no mess.
No curing or drying time. Provides an immediate firestop.
Reusable for convenient retrofit.
Non-toxic.
Excellent shelf life.
Smoke and gas tight.
Weather resistant.
Intumescent.
Easily repenetrated.
Tested to UL-1479, ASTM E-84 and E-814.
|
| |
Click for MSDSClick for Technical Data |
|
|
| |
|
| |
 |
Nelson
CPS(TM) Composite Sheet Features
Intumescent.
Self-supporting panels.
Tested to ASTM E-814 and UL-1479.
Easy to install, cut to size with common trade tools.
|
| |
Click for MSDSClick for Technical Data |
|
|
|
|
| |
 |
Nelson
LBS+(TM) Firestop
Sealant:
Nelson
LBS+(TM) is an intumescent, flexible, firestop
sealant used to seal against the spread of flame, smoke,
gasses and water in fire-rated walls and floors that
have been penetrated for the passage of items such as
metallic and nonmetallic pipes, conduit, bus duct or
electrical cables. It is particularly useful for sealing
penetrating items which are subject to movement and
vibration when a positive seal is required. Nelson LBS+
is a highly adhesive sealant suitable for wall, floor
and overhead applications.
|
| |
Click
for MSDSClick for Technical Data |
|
|
| |
|
Application/System Index